CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В. 00345

Серия RU № 0167114

 

CERTIFICATION BODY
Limited Liability Company “CENTER CONFIRMATION OF COMPLIANCE”.

Location, including actual address: Kirov Street, house 113, Novosibirsk, Novosibirsk Region, Russian Federation, 630008. Telephone (383) 363-38-63, fax (383) 363-38-63, e-mail address Accreditation certificate № РОСС RU.0001.10НО12 from 26.06.2014 issued by the Federal Service for accreditation.

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

 

PRODUCTS
Industrial valves, types: GATE valve (Задвижки) models: AP-GA-FL, AP-GA-BW; GLOBE valve (Клапаны (вентили)) models: AP-GL-BW, AP-GL-FL; CHECK valve (Клапаны обратные) models: AP-CH-FL, AP-CH-BW; BUTTERFLY valve (Затворы дисковые) models AP-BF-FL, AP-BF-WF, AP-BF-LU; BALL valves (Краны шаровые) models: AP-BA-BW, AP-BA-SW, AP-BA-FL, in accordance with Annex 1 to form series RU № 0126649. are made on the project documentation “APOLLO Co., Ltd.”: Set assembly drawings № AP-A1412-GA, № AP-A1412-GL, № AP-CH-A1412, № AP-A1412-BF, № AP-A1412-VA. Serial release.

 

КОД ТН ВЭД ТС 8481

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 010/2011)

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 2820, № 2821 from 07.04.2015 Testing Laboratory of the Closed Joint-Stock Company “Research Center” TekhnoProgress “accreditation certificate registration number РОСС RU.0001.21МЭ67 from 02.09.2010 till 02.09.2015; Declaration of Conformity № RU Д-КR.МН04.В.00110 from 09.04.2015; Protocols factory tests № AP-A1412-024-000, AP-TR-1501-003 from 28.01.2015, № AP-TR-1410-004, AP-TR-1410-005, AP-TR-1410-006 from 13.03 .2015 of the manufacturer “APOLLO Co., LTD”; Certificate of Conformity Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., LTD.

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. Average life – 6000 cycles. The service life (operation) before overhaul – 15 years. Service life – 40 years.

 

VALID FROM 19.05.2015 TO 18.05.2020 IN INCLUSIVE

 

Head of Certification (authorized person) Y A Chernyshova
Expert (expert-auditor) E V Sosnina

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В.00345

Серия RU № 0126649

 

Код

ТН ВЭД ТС

The name, type, mark, model similar products, parts or products complex Designation of documentation on which the manufactured products
8481 00 000 0 GATE valve (Задвижки) models: AP-GA-FL, AP-GA-BW,

nominal diameter from 15 to 1400 mm, maximum allowable working pressure of 1,873 MPa to 43.19, the operating temperature of -196 ° C up to 840 C °;

GLOBE valve (Клапаны (вентили)) models: AP-GL-FL, AP-GL-BW,

nominal diameter from 15 to 450 mm, the maximum allowable working pressure of 1,873 MPa to 43.19, the operating temperature of -196 ° C up to 840 C °;

CHECK valve (Клапаны обратные) models: AP-CH-FL, AP-CH-BW,

nominal diameter from 15 to 900 mm, the maximum allowable working pressure of 1,873 MPa to 43.19, the operating temperature of -196 ° C up to 840 C °;

BUTTERFLY valve (Затворы дисковые) models: AP-BF-FL, AP-BF-WF, AP-BF-LU,

nominal diameter from 50 to 1400 mm, maximum allowable working pressure of 1,873 MPa to 10.44, the operating temperature of -196 ° C up to 840 C °;

BALL valve (Краны шаровые) models: AP-BA-BW, AP-BA-SW, AP-BA-FL,

nominal diameter from 15 to 1400 mm, maximum allowable working pressure of 1,873 MPa to 43.19, the operating temperature of -196 ° C up to 840 C °.

 

Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.

Project documentation

“APOLLO Co., LTD”:

set of assembly drawings

 

№ АР-А1412-GA,

№ AP-A1412-GL,

№ АР-А1412-СН,

№ AP-A1412-BF,

№ АР-А1412-ВА.

 

 

Head of Certification (authorized person) Y A Chernyshova
Expert (expert-auditor) E V Sosnina

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В.00388

Series RU № 0168010

 

CERTIFICATION BODY
Limited Liability Company “CENTER CONFIRMATION OF COMPLIANCE”.

Location, including actual address: Kirov Street, house 113, Novosibirsk, Novosibirsk Region, Russian Federation, 630008. Telephone (383) 363-38-63, fax (383) 363-38-63, e-mail address Accreditation certificate № РОСС RU.0001.10НО12 issued by the Federal Service for accreditation.

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

 

PRODUCTS
Fittings Type: PLUG valve (Краны цилиндрические (пробковые)), model AP-PL-SL-FL, AP-PL-SL-BW, nominal diameter of 15 to 600 mm, the maximum allowable working pressure of 1 to 40 MPa and temperature of the working environment from -196 degrees Celsius to +650 degrees Celsius; Model AP-PL-LI-FL, a nominal diameter of 15 to 600 mm; maximum allowable working pressure of 1 to 40 MPa and temperature of the working environment of -50 degrees Celsius to +230 degrees Celsius. Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.. Products manufactured in according to the project documentation «APOLLO CO., Ltd.»: a set of assembly drawings number АР-А1412-PL. Serial release.

 

КОД ТН ВЭД ТС 8481

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 010/2011)

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 116-06, № 117-06, № 118-06, № 119-06 from 16.06.2015 Testing Laboratory  Limited Liability Company “Siberian center for examination and conformity assessment”, accreditation certificate registration number РОСС RU.0001.21MP37 from 30.10.2014 till 15.07.2016; the documents submitted by applicant as proof of product compliance with technical regulations of the Customs union ТР ТС 010/2011 ” On the safety of machinery and equipment ” (see Annex to form series RU № 0126673).

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 15 years. Average life – 6000 cycles. Basic service life – 40 years.

 

VALID FROM 18.06.2015 TO 17.06.2020 IN INCLUSIVE

 

Head of Certification (authorized person) Y A Chernyshova
Expert (expert-auditor) E V Makarova

 

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В. 00388

Series RU № 0126673

 

The documents submitted by the applicant as proof of product compliance with technical regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 010/2011):

The constituent documents of the applicant (certificate ОГРН, ИНН/КПП, codes statistics);
Contract representation with APOLLO Co., Ltd .;
“PLUG valve (Краны цилиндрические (пробковые)). The safety”;
“PLUG valve (Краны цилиндрические (пробковые)). Passport”;
“PLUG valve (Краны цилиндрические (пробковые)). User’s Guide”;
Project documentation “APOLLO Co., Ltd.”: a set of assembly drawings № AP-A1412-PL;
Minutes of the factory test «PLUG valve (Краны цилиндрические (пробковые))» № AP-TR-1310-001, № AP-TR-1310-002, № AP-TR-1310-003, № AP-TR-1310-004 by 02.10.2014 conducted by the manufacturer “APOLLO Co., Ltd.”;
Labelling of products meets the requirements of ТР ТС 010/2011;
Certificate of Compliance Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., Ltd .;
Certificate of Conformity № ТС RU C-KR.H012.В.00362 from 01.06.2015 on 31.05.2020;
The list of standards used by the manufacturer, as a result of which, on a voluntary basis, compliance with the technical regulations of the Customs Union ” On the safety of machinery and equipment ” (ТР ТС 010/2011), and which comply with the requirements of PLUG valve.

 

Head of Certification (authorized person) A S Karpov
Expert (expert-auditor) E V Sosnina

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В. 00362

Series RU № 0167131

 

CERTIFICATION BODY
Limited Liability Company “CENTER CONFIRMATION OF COMPLIANCE”.

Location, including actual address: Kirov Street, house 113, Novosibirsk, Novosibirsk Region, Russian Federation, 630008. Telephone (383) 363-38-63, fax (383) 363-38-63, e-mail address Accreditation certificate № РОСС RU.0001.10НО12 from 26.06.2014 issued by the Federal Service for accreditation.

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd., filial HKC Co Ltd.
Location: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea.
Address of branches: (Seonggok-dong), 155 Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, (425-836), Republic Of Korea.

 

PRODUCTS

Pneumo actuators for fittngs: Series HP models: HP-35, HP-50, HP-63, HP-66, HP-75, HP-88, HP-100, HP-115, HP-125, HP-145, HP-160, HP-180, HP-200, HP-210, HP-211, HP-212. Series ET models: ETS-050, ETS-065, ETS-085, ETS-100, ETS-130, ETS-160, ETS-200, ETS-270, ETC-065, ETC-085, ETC-100, ETC-130, ETC-160, ETC-200, ETC-270. Complete with manual control mechanism Series HGO models: HGO-010, HGO-050, HGO-080, HGO-150. Products manufactured in according to the project documentation «APOLLO CO., Ltd.», branch HKC CO., Ltd.: a set of assembly drawings № ET, № HP, № HGO. Serial release.

 

КОД ТН ВЭД ТС 8412 39 000

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 010/2011)

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 75-03, № 76-03, № 77-03 from 13. 03. 2015 Testing Laboratory  Limited Liability Company “Siberian center for examination and conformity assessment”, accreditation certificate registration number РОСС RU.0001.21MP37 from 30.10.2014 till 15.07.2016;Factory testing protocols: № HP 141205-002, № HP 141205-006, № ЕТ 141205-001 from 05. 12. 2014, № HG 141205-009 from 03. 12. 2014, of the manufacturer “APOLLO Co., LTD”; branch НКС Со., Ltd.; Certificate of Conformity Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., LTD.

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 5 years. The temperature regime of of operating conditions from -60 ° C to + 60 ° C.

 

VALID FROM 01.06.2015 TO 31.05.2020 IN INCLUSIVE

 

Head of Certification (authorized person) Y A Chernyshova
Expert (expert-auditor) E V Sosnina