CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В.00289

Серия RU № 0167056

CERTIFICATION BODY
Общество с ограниченной ответственностью “ЦЕНТР ПОДТВЕРЖДЕНИЯ СООТВЕТСТВИЯ”.
Адрес местонахождения, в том числе фактический: улица Кирова, дом 113, город Новосибирск, Новосибирская область, Российская Федерация, 630008. Телефон (383) 363-38-63, факс (383) 363-38-63, адрес электронной почты Аттестат аккредитации № РОСС RU.0001.10НО12 выдан 26.06.2014 Федеральной службой по аккредитации.

APPLICANT
Общество с ограниченной ответственностью “АПОЛЛО-ВОСТОК”. ОГРН: 1141690063481.
Место нахождения и фактический адрес: улица Юлиуса Фучика, дом 90А, офис 534, город Казань, Республика Татарстан, Российская Федерация, 420140. Телефон +7(843) 210-24-26, факс +7(843) 210-24-27, адрес электронной почты .

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

PRODUCTS
Fittings for use with the working environment group 1,2 hazard class 3.
Type: CHEC valve (Клапаны обратные) models: AP-CH-FL, AP-CH-BW, in accordance with Annex 1 to form series RU number 0126621. manufactured on the project documentation “APOLLO Co., LTD”: a set of assembly drawings number АР-А1412-CH. Serial release.

КОД ТН ВЭД ТС 8481

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union ТР ТС 032/2013 “On the safety of equipment operating under excessive pressure” decision by the Council of the Eurasian Economic Commission on July 2, 2013 № 41

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 2824, № 2825 from 07.04.2015 Testing Laboratory of the Closed Joint-Stock Company “Research Center” TekhnoProgress “accreditation certificate registration number РОСС RU.0001.21МЭ67 from 02.09.2015till 02.09.2015; Declaration of Conformity № RU Д-КR.МН04.В.00112 from 09.04.2015; Protocols factory tests № AP-TR-1410-019, TR-1410-020 от 02.10.2014, № AP-TR-1410-021, AP-TR-1410-022 from 13.03.2015, of the manufacturer “APOLLO Co., LTD”; Certificate of Conformity Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., LTD.

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 15 years. Average life – 6000 cycles.

VALID FROM 10.04.2015 TO 09.04.2020 IN INCLUSIVE

Head of Certification	A S Karpov
Expert	E V Sosnina

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В.00289

Серия RU № 0126621

КодТН ВЭД ТС

The name, type, mark, model similar products, parts or products complex

Designation of documentation on which the manufactured products

8481

CHEC valve (Клапаны обратные),

Model: AP-CH-FL, AP-CH-BW,

nominal diameter of 125 to 150 mm, the maximum allowable working pressure from 4.73 to 43.19 MPa;

nominal diameter of 200, 250, 300 mm, the maximum allowable working pressure of 1.873 to 43.19 MPa;

a nominal diameter of 350 mm, maximum allowable working pressure of 1,873 MPa to 25.96;

nominal diameter of 400, 450, 500, 600 mm, the maximum allowable working pressure from 4.73 to 25.96 MPa;

nominal diameter of 700, 750 mm, the maximum allowable working pressure from 4.73 to 10.44 MPa;

nominal diameter of 800, 900 mm, the maximum allowable working pressure of 4.73 to 5.272 MPa.

for use with the working environment group 2:

nominal diameter of 300 mm, the maximum allowable working pressure from 1,873 to 43,19 MPa;

nominal diameter of 350, 400, 450, 500, 600 mm, the maximum allowable working pressure from 1,873 to 25,96 MPa;

nominal diameter of 700, 750 mm, the maximum allowable working pressure from 1,873 to 10,44 MPa;

nominal diameter of 800, 900 mm, the maximum allowable working pressure from 1,873 to 5,272 Pa;

Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.

Project documentation”APOLLO Co., LTD”:

set of assembly drawings

№ АР-А1412-ВА