CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В. 00261

Series RU № 0207942

 

CERTIFICATION BODY
Autonomous Nonprofit Organization “Scientific-Technical Center «TekhnoProgress»” accreditation certificate № РОСС RU.0001.11 МН04 from 15.05.2013 issued by the Federal Service for Accreditation (Rosakkreditatsiya). Location: Russia, 115280, Moscow, street Velozavodskaya, 9. Actual address: Russia, 115114, Moscow, street Kozhevnicheskaya, 14, Building 2
Phone / Fax: +7 (495) 589-19-62, e-mail:

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd., branch HKC Co Ltd.
Location: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea.
Address of branches: (Seonggok-dong), 155 Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, (425-836), Republic Of Korea.

 

PRODUCTS

VALVE POSITION MONITOR, Series 4**N with explosion protection marking 1Ех d IIВ Т6 Gb X and Series APL-5*** with explosion protection marking 1Ех d IIC Т6 Gb X, Products manufactured in according to the project documentation «APOLLO CO., Ltd.», a set of assembly drawings №№ LB410, N501, LB411, LB412, LB413, LB414, LB415, LB416, LB420, LB421, LB422, LB423, LB425, LB426, LB430, LB510, LB511, LB512, LB513, LB514, LB515, LB5I6, LB520, LB521, LB522, LB523, LB525, LB526, LB530.
Serial release.

 

КОД ТН ВЭД ТС 8536 50 800 0

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of equipment for use in explosive environments ” (TR CU 012/2011)

 

CERTIFICATE ISSUED ON THE BASIS OF
Protocols of certification tests № 2645Ех from 31.03.2015, issued by the testing laboratory of CJSC “NRC «TekhnoProgress»”(accreditation certificate № РОСС RU.0001.21МЭ67 from 02.09.2010 to 02.09.2015, Moscow); Act on the results of the analysis of the production №1485 A of 15.12.2014 (the certification body ANO SEC “TekhnoProgress” accreditation certificate № РОСС RU.0001.11MH04).

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). The designated shelf life without reconservation under the conditions of storage – 2 years. Service life – 5 years, assigned resource – 80,000 cycles. Scope – non-hazardous area.

Storage conditions – 7 Ж1 in accordance with ГОСТ 15150-69. Shelf life without reconservation – 2 years, when stored. The service life – 5 years, assigned resource – 100,000 cycles. Additional information identifying the products in the Annex on forms №№ 0183271, 0183272.

 

VALID FROM 09.04.2015 TO 08.04.2020 IN INCLUSIVE

 

Head of Certification (authorized person) A Y Verveyko
Expert (expert-auditor) M M Sargaeva

 

ANNEX

to the certificate of conformity №ТС RU C-KR.MH04.B.00261

Series RU №0183271

 

1 Purpose and scope

VALVE POSITION MONITOR Series 4**N with explosion protection marking 1Ех d IIВ Т6 Gb X and Series APL-5*** with explosion protection marking 1Ех d IIC Т6 Gb X (hereinafter – VALVE POSITION MONITOR) are designed for operation as part of pipeline valves and perform a visual indication of the position of the working body and switching circuits.
Scope – explosive zones of premises and external installations in accordance with explosion protection marking, ГОСТ IEC 60079-14-2011 and industrial safety regulations governing the use of this equipment in explosive environments.

2 Main technical data

2.1 Main technical data of limit switches are shown in Table 1.

Name of parameter Value
Explosion protection marking ГОСТ Р МОК 60079-0-2011:

–                      Series APL-4**N

–                      Series APL-5***

1Ex d IIB Т6 Gb X

1Ex d IIC Т6 Gb X

Protection class from external influences provided by the shell, according to ГОСТ 14254-96. not less than IP 67
Ambient temperature range during operation, ° C от минус 60 до плюс 60
Electrical circuits

mechanical switch, not more. A / B

potentiometer. kOm

sentinel node, mA

16/250

from 0 to 1; from 0 to 5; from 0 to 10

from 4 to 20; from 20 to 4

2.2 Symbol structure of VALVE POSITION MONITOR:

VALVE POSITION MONITOR APL-X1XX2X3,

where:

X1 -type case:

4 – with explosion protection marking 1Ех d IIВ Т6 Gb X

5 – with explosion protection marking 1Ех d IIC Т6 Gb X

XX2 – block type electrical contacts:

mechanical

10 – two single-pole changeover switches type SZM-V16-5FA-61:

11 – Three-pole changeover switches type SZM-V16-5FA-61;

12 – Four-pole changeover switches type SZM-V16-5FA-61:

13 – two single-pole switch for one direction type SZM-V16-5EA-61:

14 – two two-pole switch in the two directions of type DZ-10GW-1B;

15 – two single-pole changeover switches type SZM-V16-5FA-61 and the potentiometer;

16 – 4-20 mA signal node and two-pole changeover switches type SZM-V16-5FA-61: Contactless

20 – non-contact sensor type NJ2-V3-N;

21 – non-contact sensor type PS17-5DNU;

22 – non-contact sensor type NJ4-12GM-N;

23 – non-contact sensor type NBB2-V3:

25 – non-contact sensor and a potentiometer type NJ2-V3-N;

26 – 4-20 mA signal node and a non-contact sensor type NJ2-V3-N;

30 – non-contact sensor based on the type of reed switch MS-B 301.

X3 – body material:

N – aluminum alloy AK12M2 GOST 1583-93;

S – stainless steel according to GOST 7350-77 08H18H10.

3 Description of the construction product and means of protection

3.1 Structurally limit switches series APL-4 ** N consist of the following main components: casing with cover, shaft with cams, windows, position indicator and the indicator itself, the unit switches or sensors, terminal block, external-internal ground terminal.

Head of Certification (authorized person) A Y Verveyko
Expert (expert-auditor) M M Sargaeva

ANNEX

to the certificate of conformity №ТС RU C-KR.MH04.B.00261

Series RU №0183271

 

Housing with a lid made of aluminum alloy and the shaft passing through them with cams form flameproof cylindrical compounds at the interface with the shaft body and the cover, the connection between the planar and the housing krysh¬koy. Housing powder coated products based on polyester resins KARUMEL RH8576. To connect to the housing with the cover with 6 screws with hexagon socket wrench. Inside the case are located zazem¬leniya terminal and terminal block, which is connected to the external signal circuits and wires from the power switches or sensors. On top of the lid position indicator window is made of polycarbonate and the position indicator itself planted at the output end of the shaft with cams.

To connect to the electrical circuits in the body there are two threaded holes for cable glands, all neispol¬zuemye holes are closed with plugs.

Structurally limit switches series APL-5 *** are identical in construction with a series of limit switches APL-4 ** N except that the connection between the lid and holds the threaded body. Depending on is¬polneniya body and cover may be made of stainless steel.

3.2 Special conditions for safe use «X». X within the marking Ex limit switches indicating their special conditions of safe use of X. are as follows:

– Cable inside the shell should be done through the cable entries having valid certificates of conformity, allowing the possibility of using in hazardous areas (the Certificates), with type of protection “flameproof enclosure« d ». subgroup of gas, the degree of protection against external influences IP and ambient temperature range during operation is not lower than indicated in Table 1;

– Unused openings in the shell must be sealed with plugs that have a current certificate with type of protection “flameproof enclosure« d », a subgroup of the gas, the degree of protection against external influences and IP dia¬pazonom ambient temperature during operation is not lower than indicated in Table 1:

– Limit switches must be installed in places protected from jets of air with dust particles and other external factors that contribute to the accumulation of static electricity on the light-transmitting element and the painted surfaces of the body;

– In the maintenance of the housing with a damp clean cloth.

3.3 Explosion-proof limit switch is provided by the type of protection “explosion-hull about d» GOST IEC 60079-1-2011 and performance of their designs according to the requirements of GOST R IEC 60079-0-2011.

3.4 Changes to the agreed drawings and design of products is possible only by agreement with the ELN OS SEC “TekhnoProgress.”

4 Marking, applied to equipment that includes the following information:

– The name of the manufacturer or his registered trademark;

– The name of the product, the type;

– Marking of explosion;

– -day Issue and the serial number of the product on the numbering system of the manufacturer:

– The name or mark of the certification body and number of the certificate of conformity;

– -special Sign of explosion, in accordance with Appendix 2 TR CU 012/2011;

– A single sign of products on the market of the Customs Union member states, according to para. 1, Art. 7 TR CU 012/2011;

– Warnings: “Open, disconnected from the network”, “potential danger of electrostatic charge. See. Instructions “;

– Other data that should reflect the manufacturer, if required technical documentation.

 

Head of Certification (authorized person) A Y Verveyko
Expert (expert-auditor) M M Sargaeva

 

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В.00259

Series RU № 0207941

 

CERTIFICATION BODY
Autonomous Nonprofit Organization “Scientific-Technical Center «TekhnoProgress»” accreditation certificate № РОСС RU.0001.11 МН04 from 15.05.2013 issued by the Federal Service for Accreditation (Rosakkreditatsiya). Location: Russia, 115280, Moscow, street Velozavodskaya, 9. Actual address: Russia, 115114, Moscow, street Kozhevnicheskaya, 14, Building 2
Phone / Fax: +7 (495) 589-19-62, e-mail:

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd., branch HKC Co Ltd.
Location: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea.
Address of branches: (Seonggok-dong), 155 Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, (425-836), Republic Of Korea.

 

PRODUCTS

VALVE POSITION MONITOR, Series APL-3, models: APL-310N, APL-311N, APL-312N APL-313N, APL-314N, APL-315N, APL-316N, APL-320N, APL-321N, APL-323N, APL-330N, Products manufactured in according to the project documentation «APOLLO CO., Ltd.», a set of assembly drawings № LB310.
Serial release.

 

КОД ТН ВЭД ТС 8536 50 800 0

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of low voltage equipment” (TR CU 004/2011)

 

CERTIFICATE ISSUED ON THE BASIS OF
Protocols of certification tests №№ 2715 from 26.03.2015, issued by the testing laboratory of CJSC “NRC «TekhnoProgress»”(accreditation certificate № РОСС RU.0001.21МЭ67 from 02.09.2010 to 02.09.2015, Moscow); Act on the results of the analysis of the production №1485 A of 15.12.2014 (the certification body ANO SEC “TekhnoProgress” accreditation certificate № РОСС RU.0001.11MH04).

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). The designated shelf life without reconservation under the conditions of storage – 2 years. Service life – 5 years, assigned resource – 100,000 cycles. Scope – non-hazardous area.

 

VALID FROM 09.04.2015 TO 08.04.2020 IN INCLUSIVE

 

Head of Certification (authorized person) A Y Verveyko
Expert (expert-auditor) M M Sargaeva

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.MH04.В.00260

Series RU № 0207940

 

CERTIFICATION BODY
Autonomous Nonprofit Organization “Scientific-Technical Center «TekhnoProgress»” accreditation certificate № РОСС RU.0001.11 МН04 from 15.05.2013 issued by the Federal Service for Accreditation (Rosakkreditatsiya). Location: Russia, 115280, Moscow, street Velozavodskaya, 9. Actual address: Russia, 115114, Moscow, street Kozhevnicheskaya, 14, Building 2
Phone / Fax: +7 (495) 589-19-62, e-mail:

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd., branch HKC Co Ltd.
Location: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea.
Address of branches: (Seonggok-dong), 155 Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, (425-836), Republic Of Korea.

 

PRODUCTS

Electric actuators, Series HP, models: HQ-008, HQ-010, HQ-015, HQ-020, HQ-030, HQ-050, HQ-060, HQ-080, HQ-120, HQ-200, HQ-ЗОО, Series НМ, models: НМ-004, НМ-008, НМ-011, НМ-020, НМ-040, НМ-060, НМ-100, НМ-150, НМ-200, НМ-300, Products manufactured in according to the project documentation «APOLLO CO., Ltd.», branch HKC CO., Ltd.: a set of assembly drawings № М004, М020, М060, М100, М200, N001, Q008, Q015, Q030, Q080.
Serial release.

 

КОД ТН ВЭД ТС 8501 40, 8501 51 000, 8501 52, 8501 53

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of low voltage equipment” (TR CU 004/2011)

Technical Regulations of the Customs Union “Electromagnetic compatibility of technical means” (TR CU 020/2011).

 

CERTIFICATE ISSUED ON THE BASIS OF
Protocols of certification tests №№ 2717, 2718 from 03.04.2015, №№ 2783-2790 by 03.04,2015 issued by the testing laboratory of CJSC “NRC «TekhnoProgress»”(accreditation certificate № РОСС RU.0001.21МЭ67 from 02.09.2010 to 02.09.2015, Moscow); Act on the results of the analysis of the production №1485 A of 15.12.2014 (the certification body ANO SEC “TekhnoProgress” accreditation certificate № РОСС RU.0001.11MH04).

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). The designated shelf life without reconservation under the conditions of storage – 2 years. Service life – 5 years, assigned resource – 80,000 cycles. Scope – non-hazardous area.

 

VALID FROM 09.04.2015 TO 08.04.2020 IN INCLUSIVE

 

Head of Certification (authorized person) A Y Verveyko
Expert (expert-auditor) M M Sargaeva

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В. 00345

Серия RU № 0167114

 

CERTIFICATION BODY
Limited Liability Company “CENTER CONFIRMATION OF COMPLIANCE”.

Location, including actual address: Kirov Street, house 113, Novosibirsk, Novosibirsk Region, Russian Federation, 630008. Telephone (383) 363-38-63, fax (383) 363-38-63, e-mail address Accreditation certificate № РОСС RU.0001.10НО12 from 26.06.2014 issued by the Federal Service for accreditation.

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

 

PRODUCTS
Industrial valves, types: GATE valve (Задвижки) models: AP-GA-FL, AP-GA-BW; GLOBE valve (Клапаны (вентили)) models: AP-GL-BW, AP-GL-FL; CHECK valve (Клапаны обратные) models: AP-CH-FL, AP-CH-BW; BUTTERFLY valve (Затворы дисковые) models AP-BF-FL, AP-BF-WF, AP-BF-LU; BALL valves (Краны шаровые) models: AP-BA-BW, AP-BA-SW, AP-BA-FL, in accordance with Annex 1 to form series RU № 0126649. are made on the project documentation “APOLLO Co., Ltd.”: Set assembly drawings № AP-A1412-GA, № AP-A1412-GL, № AP-CH-A1412, № AP-A1412-BF, № AP-A1412-VA. Serial release.

 

КОД ТН ВЭД ТС 8481

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 010/2011)

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 2820, № 2821 from 07.04.2015 Testing Laboratory of the Closed Joint-Stock Company “Research Center” TekhnoProgress “accreditation certificate registration number РОСС RU.0001.21МЭ67 from 02.09.2010 till 02.09.2015; Declaration of Conformity № RU Д-КR.МН04.В.00110 from 09.04.2015; Protocols factory tests № AP-A1412-024-000, AP-TR-1501-003 from 28.01.2015, № AP-TR-1410-004, AP-TR-1410-005, AP-TR-1410-006 from 13.03 .2015 of the manufacturer “APOLLO Co., LTD”; Certificate of Conformity Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., LTD.

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. Average life – 6000 cycles. The service life (operation) before overhaul – 15 years. Service life – 40 years.

 

VALID FROM 19.05.2015 TO 18.05.2020 IN INCLUSIVE

 

Head of Certification (authorized person) Y A Chernyshova
Expert (expert-auditor) E V Sosnina

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В.00345

Серия RU № 0126649

 

Код

ТН ВЭД ТС

The name, type, mark, model similar products, parts or products complex Designation of documentation on which the manufactured products
8481 00 000 0 GATE valve (Задвижки) models: AP-GA-FL, AP-GA-BW,

nominal diameter from 15 to 1400 mm, maximum allowable working pressure of 1,873 MPa to 43.19, the operating temperature of -196 ° C up to 840 C °;

GLOBE valve (Клапаны (вентили)) models: AP-GL-FL, AP-GL-BW,

nominal diameter from 15 to 450 mm, the maximum allowable working pressure of 1,873 MPa to 43.19, the operating temperature of -196 ° C up to 840 C °;

CHECK valve (Клапаны обратные) models: AP-CH-FL, AP-CH-BW,

nominal diameter from 15 to 900 mm, the maximum allowable working pressure of 1,873 MPa to 43.19, the operating temperature of -196 ° C up to 840 C °;

BUTTERFLY valve (Затворы дисковые) models: AP-BF-FL, AP-BF-WF, AP-BF-LU,

nominal diameter from 50 to 1400 mm, maximum allowable working pressure of 1,873 MPa to 10.44, the operating temperature of -196 ° C up to 840 C °;

BALL valve (Краны шаровые) models: AP-BA-BW, AP-BA-SW, AP-BA-FL,

nominal diameter from 15 to 1400 mm, maximum allowable working pressure of 1,873 MPa to 43.19, the operating temperature of -196 ° C up to 840 C °.

 

Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.

Project documentation

“APOLLO Co., LTD”:

set of assembly drawings

 

№ АР-А1412-GA,

№ AP-A1412-GL,

№ АР-А1412-СН,

№ AP-A1412-BF,

№ АР-А1412-ВА.

 

 

Head of Certification (authorized person) Y A Chernyshova
Expert (expert-auditor) E V Sosnina

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В.00388

Series RU № 0168010

 

CERTIFICATION BODY
Limited Liability Company “CENTER CONFIRMATION OF COMPLIANCE”.

Location, including actual address: Kirov Street, house 113, Novosibirsk, Novosibirsk Region, Russian Federation, 630008. Telephone (383) 363-38-63, fax (383) 363-38-63, e-mail address Accreditation certificate № РОСС RU.0001.10НО12 issued by the Federal Service for accreditation.

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

 

PRODUCTS
Fittings Type: PLUG valve (Краны цилиндрические (пробковые)), model AP-PL-SL-FL, AP-PL-SL-BW, nominal diameter of 15 to 600 mm, the maximum allowable working pressure of 1 to 40 MPa and temperature of the working environment from -196 degrees Celsius to +650 degrees Celsius; Model AP-PL-LI-FL, a nominal diameter of 15 to 600 mm; maximum allowable working pressure of 1 to 40 MPa and temperature of the working environment of -50 degrees Celsius to +230 degrees Celsius. Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.. Products manufactured in according to the project documentation «APOLLO CO., Ltd.»: a set of assembly drawings number АР-А1412-PL. Serial release.

 

КОД ТН ВЭД ТС 8481

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 010/2011)

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 116-06, № 117-06, № 118-06, № 119-06 from 16.06.2015 Testing Laboratory  Limited Liability Company “Siberian center for examination and conformity assessment”, accreditation certificate registration number РОСС RU.0001.21MP37 from 30.10.2014 till 15.07.2016; the documents submitted by applicant as proof of product compliance with technical regulations of the Customs union ТР ТС 010/2011 ” On the safety of machinery and equipment ” (see Annex to form series RU № 0126673).

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 15 years. Average life – 6000 cycles. Basic service life – 40 years.

 

VALID FROM 18.06.2015 TO 17.06.2020 IN INCLUSIVE

 

Head of Certification (authorized person) Y A Chernyshova
Expert (expert-auditor) E V Makarova

 

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В. 00388

Series RU № 0126673

 

The documents submitted by the applicant as proof of product compliance with technical regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 010/2011):

The constituent documents of the applicant (certificate ОГРН, ИНН/КПП, codes statistics);
Contract representation with APOLLO Co., Ltd .;
“PLUG valve (Краны цилиндрические (пробковые)). The safety”;
“PLUG valve (Краны цилиндрические (пробковые)). Passport”;
“PLUG valve (Краны цилиндрические (пробковые)). User’s Guide”;
Project documentation “APOLLO Co., Ltd.”: a set of assembly drawings № AP-A1412-PL;
Minutes of the factory test «PLUG valve (Краны цилиндрические (пробковые))» № AP-TR-1310-001, № AP-TR-1310-002, № AP-TR-1310-003, № AP-TR-1310-004 by 02.10.2014 conducted by the manufacturer “APOLLO Co., Ltd.”;
Labelling of products meets the requirements of ТР ТС 010/2011;
Certificate of Compliance Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., Ltd .;
Certificate of Conformity № ТС RU C-KR.H012.В.00362 from 01.06.2015 on 31.05.2020;
The list of standards used by the manufacturer, as a result of which, on a voluntary basis, compliance with the technical regulations of the Customs Union ” On the safety of machinery and equipment ” (ТР ТС 010/2011), and which comply with the requirements of PLUG valve.

 

Head of Certification (authorized person) A S Karpov
Expert (expert-auditor) E V Sosnina

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В. 00362

Series RU № 0167131

 

CERTIFICATION BODY
Limited Liability Company “CENTER CONFIRMATION OF COMPLIANCE”.

Location, including actual address: Kirov Street, house 113, Novosibirsk, Novosibirsk Region, Russian Federation, 630008. Telephone (383) 363-38-63, fax (383) 363-38-63, e-mail address Accreditation certificate № РОСС RU.0001.10НО12 from 26.06.2014 issued by the Federal Service for accreditation.

 

APPLICANT
Limited Liability Company “APOLLO-VOSTOK”. BIN: 1141690063481.

Location and actual address: Julius Fucik Street, house 90A, office 534, Kazan, Republic of Tatarstan, Russian Federation, 420140. Phone: +7 (843) 210-24-26, fax +7 (843) 210-24-27 , e-mail:

 

MANUFACTURER
APOLLO Со., Ltd., filial HKC Co Ltd.
Location: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea.
Address of branches: (Seonggok-dong), 155 Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, (425-836), Republic Of Korea.

 

PRODUCTS

Pneumo actuators for fittngs: Series HP models: HP-35, HP-50, HP-63, HP-66, HP-75, HP-88, HP-100, HP-115, HP-125, HP-145, HP-160, HP-180, HP-200, HP-210, HP-211, HP-212. Series ET models: ETS-050, ETS-065, ETS-085, ETS-100, ETS-130, ETS-160, ETS-200, ETS-270, ETC-065, ETC-085, ETC-100, ETC-130, ETC-160, ETC-200, ETC-270. Complete with manual control mechanism Series HGO models: HGO-010, HGO-050, HGO-080, HGO-150. Products manufactured in according to the project documentation «APOLLO CO., Ltd.», branch HKC CO., Ltd.: a set of assembly drawings № ET, № HP, № HGO. Serial release.

 

КОД ТН ВЭД ТС 8412 39 000

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 010/2011)

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 75-03, № 76-03, № 77-03 from 13. 03. 2015 Testing Laboratory  Limited Liability Company “Siberian center for examination and conformity assessment”, accreditation certificate registration number РОСС RU.0001.21MP37 from 30.10.2014 till 15.07.2016;Factory testing protocols: № HP 141205-002, № HP 141205-006, № ЕТ 141205-001 from 05. 12. 2014, № HG 141205-009 from 03. 12. 2014, of the manufacturer “APOLLO Co., LTD”; branch НКС Со., Ltd.; Certificate of Conformity Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., LTD.

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 5 years. The temperature regime of of operating conditions from -60 ° C to + 60 ° C.

 

VALID FROM 01.06.2015 TO 31.05.2020 IN INCLUSIVE

 

Head of Certification (authorized person) Y A Chernyshova
Expert (expert-auditor) E V Sosnina

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В.00288

Серия RU № 0167055

 

CERTIFICATION BODY
Общество с ограниченной ответственностью “ЦЕНТР ПОДТВЕРЖДЕНИЯ СООТВЕТСТВИЯ”.
Адрес местонахождения, в том числе фактический: улица Кирова, дом 113, город Новосибирск, Новосибирская область, Российская Федерация, 630008. Телефон (383) 363-38-63, факс (383) 363-38-63, адрес электронной почты Аттестат аккредитации № РОСС RU.0001.10НО12 выдан 26.06.2014 Федеральной службой по аккредитации.

 

APPLICANT
Общество с ограниченной ответственностью “АПОЛЛО-ВОСТОК”. ОГРН: 1141690063481.
Место нахождения и фактический адрес: улица Юлиуса Фучика, дом 90А, офис 534, город Казань, Республика Татарстан, Российская Федерация, 420140. Телефон +7(843) 210-24-26, факс +7(843) 210-24-27, адрес электронной почты .

 

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

 

PRODUCTS
Fittings for use with the working environment group 1 ,2, hazard class 3.
Type: GATE valve (Задвижки) models: AP-GA-FL, AP-GA-BW, in accordance with Annex 1 to form series RU number 0126620. manufactured on the project documentation “APOLLO Co., LTD”: a set of assembly drawings number АР-А1412-GА. Serial release.

 

КОД ТН ВЭД ТС 8481

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union ТР ТС 032/2013 “On the safety of equipment operating under excessive pressure” decision by the Council of the Eurasian Economic Commission on July 2, 2013 № 41

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 2818, № 2819 from 07.04.2015 Testing Laboratory of the Closed Joint-Stock Company “Research Center” TekhnoProgress “accreditation certificate registration number РОСС RU.0001.21МЭ67 from 02.09.2010 till 02.09.2015; Declaration of Conformity № RU Д-КR.МН04.В.00110 from 09.04.2015; Protocols factory tests № AP-TR-1410-015 от 02.10.2014, № AP-TR-1410-017, AP-TR-1410-018 from 13.03.2015 of the manufacturer “APOLLO Co., LTD”; Certificate of Conformity Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., LTD.

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 15 years. Average life – 6000 cycles.

 

VALID FROM 10.04.2015 TO 09.04.2020 IN INCLUSIVE

 

Head of Certification A S Karpov
Expert E V Sosnina

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В.00288

Серия RU № 0126620

 

Код

ТН ВЭД ТС

The name, type, mark, model similar products, parts or products complex Designation of documentation on which the manufactured products
8481 GATE valve (Задвижки),

Model: AP-GA-FL, AP-GA-BW,

for use with the working environment group 1:

nominal diameter of 125, 150 mm, the maximum allowable working pressure from 4.73 to 43.19 MPa;

nominal diameter of 200, 250, 300 mm, the maximum allowable working pressure of 1.873 to 43.19 MPa;

a nominal diameter of 350 mm, maximum allowable working pressure of 1,873 MPa to 25.96;

nominal diameter of 400, 450, 500, 600 mm, the maximum allowable working pressure from 4.73 to 25.96 MPa;

nominal diameter of 700, 750 mm, the maximum allowable working pressure from 4.73 to 10.44 MPa;

nominal diameter of 800, 900 mm, the maximum allowable working pressure from 4.73 to 15.61 MPa;

nominal diameter of 1000, 1100, 1200, 1400 mm, maximum allowable working pressure of 4.73 to 5.272 MPa.

 

for use with the working environment group 2:

nominal diameter of 300 mm, the maximum allowable working pressure from 1,873 до 43,19 MPa;

nominal diameter of 350, 400, 450, 500, 600 mm, the maximum allowable working pressure from 1,873 до 25,96 MPa;

nominal diameter of 700, 750 mm, the maximum allowable working pressure from 1,873 до 10,44 MPa;

nominal diameter of 800, 900 mm, the maximum allowable working pressure from 1,873 до 5,272 MPa;

nominal diameter of 1000, 1100, 1200, 1400 mm, the maximum allowable working pressure from 1,873 до 2,018 MPa.

 

Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.

Project documentation

“APOLLO Co., LTD”:

set of assembly drawings

 

№ АР-А1412-GА

 

 

Head of Certification A S Karpov
Expert E V Sosnina

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В.00418

Серия RU № 0168040

 

CERTIFICATION BODY
Общество с ограниченной ответственностью “ЦЕНТР ПОДТВЕРЖДЕНИЯ СООТВЕТСТВИЯ”.
Адрес местонахождения, в том числе фактический: улица Кирова, дом 113, город Новосибирск, Новосибирская область, Российская Федерация, 630008. Телефон (383) 363-38-63, факс (383) 363-38-63, адрес электронной почты Аттестат аккредитации № РОСС RU.0001.10НО12 выдан 26.06.2014 Федеральной службой по аккредитации.

 

APPLICANT
Общество с ограниченной ответственностью “АПОЛЛО-ВОСТОК”. ОГРН: 1141690063481.
Место нахождения и фактический адрес: улица Юлиуса Фучика, дом 90А, офис 534, город Казань, Республика Татарстан, Российская Федерация, 420140. Телефон +7(843) 210-24-26, факс +7(843) 210-24-27, адрес электронной почты .

 

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

 

PRODUCTS
Fittings Type: PLUG valve (Краны цилиндрические (пробковые)), model AP-PL-SL-FL, AP-PL-SL-BW, the operating temperature of -196 degrees Celsius to +650 degrees Celsius, model AP-PL- L1-FL. the operating temperature of -50 degrees Celsius to +230 degrees Celsius, for use with working environment group 1, 2, Hazard class 3, in accordance with Annex 1 to form series RU № 0126689. Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.. Products manufactured in accordance with the requirements of technical regulations of the Customs Union “On Safety equipment operating under excessive pressure” (ТР ТС 032/2013), according to the project documentation «APOLLO CO., Ltd.»: a set of assembly drawings number АР-А1412-PL. Serial release.

 

КОД ТН ВЭД ТС 8481

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 032/2013)

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 116-06, № 117-06, № 118-06, № 119-06 from 16.06.2015 Testing Laboratory  Общества с ограниченной ответственностью «Сибирский центр экспертизы и оценки соответствия», accreditation certificate registration number РОСС RU.0001.21MP37 from 30.10.2014 till 15.07.2016; the documents submitted by applicant as proof of product compliance with technical regulations of the Customs union ТР ТС 032/2013 “On the safety of equipment operating under excessive pressure” (see Annex to form series RU № 0126689).

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 15 years. Average life – 6000 cycles.

 

VALID FROM 10.04.2015 TO 09.04.2020 IN INCLUSIVE

 

Head of Certification Y A Chernyshova
Expert E V Makarova

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В.00287

Серия RU № 0126619

Код

ТН ВЭД ТС

The name, type, mark, model similar products, parts or products complex Designation of documentation on which the manufactured products
8481 PLUG valve (Краны цилиндрические (пробковые)),

Model: AP-PL-SL-FL, AP-PL-SL-BW,

the operating temperature of -196 degrees Celsius to +650 degrees Celsius.

Model: AP-PL-LI-FL, the operating temperature of -50 degrees Celsius to +230 degrees Celsius.

 

For use the working environment gas, steam Group 1, hazard class 3:

The nominal diameter of 400, 450, 500, 600 mm, maximum allowable working pressure of 1 MPa;

The nominal diameter of 200, 250, 300, 350 mm, maximum allowable working pressure of 2 MPa;

Nominal diameter of 125, 150, 200, 250, 300, 350, 400, 450, 500, 600 mm, the maximum allowable working pressure of 4 to 40 MPa.

 

For use the working environment gas, steam Group 2, hazard class 3:

The nominal diameter of 600 mm, the maximum allowable working pressure of 1 MPa;

Nominal diameter of 300, 350, 400, 450, 500, 600 mm, the maximum allowable working pressure of 2 MPa;

Nominal diameter of 300, 350, 400, 450, 500, 600 mm, the maximum allowable working pressure of 4 to 40 MPa.

 

Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.

Technical regulations of the Customs union “On the safety of equipment operating under excessive pressure”
(ТР ТС 032/2013),
Project documentation
“APOLLO Co., LTD”:
set of assembly drawings

 

№ АР-А1412-PL

 

 

Head of Certification Y A Chernyshova
Expert E V Makarova

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В. 00418

Серия RU № 0126690

 

The documents submitted by the applicant as proof of product compliance with technical regulations of the Customs Union “On the safety of equipment operating under excessive pressure” (ТР ТС 032/2013):

The constituent documents of the applicant (certificate ОГРН, ИНН/КПП, codes statistics);
Contract representation with APOLLO Co., Ltd .;
“PLUG valve (Краны цилиндрические (пробковые)). The safety”;
“PLUG valve (Краны цилиндрические (пробковые)). Calculation of strength”;
“PLUG valve (Краны цилиндрические (пробковые)). Passport”;
“PLUG valve (Краны цилиндрические (пробковые)). User’s Guide”;
Project documentation “APOLLO Co., Ltd.”: a set of assembly drawings № AP-A1412-PL;
Minutes of the factory test «PLUG valve (Краны цилиндрические (пробковые))» № AP-TR-1310-001, № AP-TR-1310-002, № AP-TR-1310-003, № AP-TR-1310-004 by 02.10.2014 conducted by the manufacturer “APOLLO Co., Ltd.”;
Technological regulations and information about the process (data on the materials used, semi-components, welding materials, the methods and parameters of welding and heat treatment methods and results of non-destructive testing);
Information about testing, measurements;
Documents confirming the qualification of professionals and staff of the manufacturer;
Certificate of Compliance Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., Ltd .; Certificate of Conformity № ТС RU C-KR.H012.В.00362 from 01.06.2015 on 31.05.2020;
Certificate of Conformity № ТС RU C-KR.HO12.B.00388 from 18.06.2015 on 17.06.2020;
The list of standards used by the manufacturer, as a result of which, on a voluntary basis, compliance with the technical regulations of the Customs Union “On Safety of equipment operating under excessive pressure” (ТР ТС 032/2013), and which comply with the requirements of PLUG valve.

 

 

Head of Certification A S Karpov
Expert E V Sosnina

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В.00287

Серия RU № 0167054

 

CERTIFICATION BODY
Общество с ограниченной ответственностью “ЦЕНТР ПОДТВЕРЖДЕНИЯ СООТВЕТСТВИЯ”.
Адрес местонахождения, в том числе фактический: улица Кирова, дом 113, город Новосибирск, Новосибирская область, Российская Федерация, 630008. Телефон (383) 363-38-63, факс (383) 363-38-63, адрес электронной почты Аттестат аккредитации № РОСС RU.0001.10НО12 выдан 26.06.2014 Федеральной службой по аккредитации.

 

APPLICANT
Общество с ограниченной ответственностью “АПОЛЛО-ВОСТОК”. ОГРН: 1141690063481.
Место нахождения и фактический адрес: улица Юлиуса Фучика, дом 90А, офис 534, город Казань, Республика Татарстан, Российская Федерация, 420140. Телефон +7(843) 210-24-26, факс +7(843) 210-24-27, адрес электронной почты .

 

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

 

PRODUCTS
Fittings for use with the working environment group 1 ,2, hazard class 3.
Type: Globe valve (Клапаны (вентили)) models: AP-GL-BW, AP-GL-FL, in accordance with Annex 1 to form series RU number 0126619. manufactured on the project documentation “APOLLO Co., LTD”: a set of assembly drawings number АР-А1412- GL. Serial release.

 

КОД ТН ВЭД ТС 8481

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union ТР ТС 032/2013 “On the safety of equipment operating under excessive pressure” decision by the Council of the Eurasian Economic Commission on July 2, 2013 № 41

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 2826, № 2827 from 07.04.2015 Testing Laboratory of the Closed Joint-Stock Company “Research Center” TekhnoProgress “accreditation certificate registration number РОСС RU.0001.21МЭ67 from 02.09.2010 till 02.09.2015; Declaration of Conformity № RU Д-КR.МН04.В.00113 from 09.04.2015; Protocols factory tests № AP-TR-1410-013, AP-TR-1410-014 from 13.03.2015 of the manufacturer “APOLLO Co., LTD”; Certificate of Conformity Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., LTD.

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 15 years. Average life – 6000 cycles.

 

VALID FROM 10.04.2015 TO 09.04.2020 IN INCLUSIVE

 

Head of Certification A S Karpov
Expert E V Sosnina

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В.00287

Серия RU № 0126619

 

Код

ТН ВЭД ТС

The name, type, mark, model similar products, parts or products complex Designation of documentation on which the manufactured products
8481 Globe valve (Клапаны (вентили)),

Model: AP-BA-BW, AP-BA-SW, AP-BA-FL,

for use with the working environment group 1:

nominal diameter of 125 to 150 mm, the maximum allowable working pressure from 4.73 to 43.19 MPa;

nominal diameter of 200, 250, 300 mm, the maximum allowable working pressure of 1.873 to 43.19 MPa;

a nominal diameter of 350 mm, maximum allowable working pressure of 1,873 MPa to 25.96;

nominal diameter of 400, 450 mm, maximum allowable working pressure of 4.73 to 25.96 MPa.

 

for use with the working environment group 2:

nominal diameter of 300 mm, the maximum allowable working pressure of 1.873 to 43.19 MPa;

a nominal diameter of 350, 400, 450 mm, maximum allowable working pressure of 4.73 to 25.96 MPa.

 

Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.

Project documentation

“APOLLO Co., LTD”:

set of assembly drawings

 

№ АР-А1412-GL

 

 

Head of Certification A S Karpov
Expert E V Sosnina

CERTIFICATE OF CONFORMITY

№ TC RU С-KR.НО12.В.00290

Серия RU № 0167057

 

CERTIFICATION BODY
Общество с ограниченной ответственностью “ЦЕНТР ПОДТВЕРЖДЕНИЯ СООТВЕТСТВИЯ”.
Адрес местонахождения, в том числе фактический: улица Кирова, дом 113, город Новосибирск, Новосибирская область, Российская Федерация, 630008. Телефон (383) 363-38-63, факс (383) 363-38-63, адрес электронной почты Аттестат аккредитации № РОСС RU.0001.10НО12 выдан 26.06.2014 Федеральной службой по аккредитации.

 

APPLICANT
Общество с ограниченной ответственностью “АПОЛЛО-ВОСТОК”. ОГРН: 1141690063481.
Место нахождения и фактический адрес: улица Юлиуса Фучика, дом 90А, офис 534, город Казань, Республика Татарстан, Российская Федерация, 420140. Телефон +7(843) 210-24-26, факс +7(843) 210-24-27, адрес электронной почты .

 

MANUFACTURER
APOLLO Со., Ltd.
Location and actual address: 22, Cheoyong-ro 487 beon-gil, Nam-gu, Ulsan (680-140), Republic Of Korea

 

PRODUCTS
Fittings for use with the working environment group 1, 2, hazard class 3.
Type: BUTTERFLY valve (Затворы дисковые) models: AP-BF-FL, AP-BF-WF, AP-BF-LU, in accordance with Annex 1 to form series RU number 0126622. manufactured on the project documentation “APOLLO Co., LTD”: a set of assembly drawings number АР-А1412-BF. Serial release.

 

КОД ТН ВЭД ТС 8481

 

COMPLIES WITH THE REQUIREMENTS
Technical Regulations of the Customs Union ТР ТС 032/2013 “On the safety of equipment operating under excessive pressure” decision by the Council of the Eurasian Economic Commission on July 2, 2013 № 41

 

CERTIFICATE ISSUED ON THE BASIS OF
The test report № 2708 from 03.04.2015, № 2822, № 2823 from 07.04.2015 Testing Laboratory of the Closed Joint-Stock Company “Research Center” TekhnoProgress “accreditation certificate registration number РОСС RU.0001.21МЭ67 from 02.09.2015 till 02.09.2015; Declaration of Conformity № RU Д-КR.МН04.В.00112 from 10.04.2015; Protocols factory tests № AP-TR-1410-007, AP-TR-1410-008 от 02.10.2014, № AP-TR-1410-009, AP-TR-1410-010 from 13.03 .2015 of the manufacturer “APOLLO Co., LTD”; Certificate of Conformity Management System ISO 9001: 2008 № KorQ-120923 APOLLO Co., LTD.

 

ADDITIONAL INFORMATION
Storage conditions – 7 Ж1 (ГОСТ 15150-69 Section 10). Shelf life without reconservation – 2 years, when stored. The service life (operation) – 15 years. Average life – 6000 cycles.

 

VALID FROM 10.04.2015 TO 09.04.2020 IN INCLUSIVE

 

Head of Certification A S Karpov
Expert E V Sosnina

 

ANNEX

FOR CERTIFICATE OF COMPLIANCE № ТС RU С-KR.НО12.В.00290

Серия RU № 0126622

 

КодТН ВЭД ТС The name, type, mark, model similar products, parts or products complex Designation of documentation on which the manufactured products
8481 BUTTERFLY valve (Затворы дисковые),Model: AP-BF-FL, AP-BF-WF,  AP-BF-LU,for use with the working environment group 1:

nominal diameter of 125 to 150 mm, the maximum allowable working pressure from 4.73 to 43.19 MPa;

nominal diameter of 200, 250, 300, 350 mm, the maximum allowable working pressure of 1.873 to 10.44 MPa;

nominal diameter of 400, 450, 500, 600, 700, 750, 800, 900, 1000, 1100, 1200, 1400 mm, the maximum allowable working pressure from 1.873 to 10.44 MPa;

 

for use with the working environment group 2:

nominal diameter of 300, 350, 400, 450, 500, 600, 700, 750, 800, 900, 1000, 1100, 1200, 1400 mm, the maximum allowable working pressure from 1,873 to 10,44 MPa;

 

Complete with electric actuators series HQ, HM; Pneumatic actuators series ET, HP; with manual control mechanism Series HGO; valve position monitor series APL.

Project documentation”APOLLO Co., LTD”:set of assembly drawings

 

№ АР-А1412-ВF

 

 

Head of Certification A S Karpov
Expert E V Sosnina